Airlive Wl-5460 Firmware Plus The Connected

Make sure your wired station is set to the same subnet as the Wireless Access Point, i.e. 192.168.100.252 Start your WEB browser.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

It features an impressive total of 7 wireless multi-function modes that are not available in normal access point.

In addition, the ACK timeout and RSSI feature makes it suitable for long distance application.

From ordinary AP application to Hotspot and WISP usage, you will find the WL-5460AP is the device you want.

WISP Client Router,WISP Universal Repeater mode 802.1x WPA Support data rate automatic fallback.

Support 802.1xRadius client with EAP-TLS, TKIP, AES encryption.

Front Panel: (LED Indicators) (5460AP 5460AP v2) Status Indicator Color Solid Flashing Power Green Turns solid green when power is NA.

Status Turns solid red when the device is booting, after boot successfully, the light turn off.

Performing the Factory Reset will erase all previously entered device settings.

Please set your PCs IP to the same subnet as the AP to access the AP In WISP mode, the DHCP server is turned on.

Usually, the best place for the Access Point is at the center of your wireless network, with line of straight to all your wireless stations.

If you want to change the settings in order to perform more advanced configuration or even change the mode of operation, you can use the web-based utility provided by the manufacturer as described in the following sections.

To set the operation mode to Access Point, please go to Mode AP.

Airlive Wl-5460 Firmware Plus The Connected

This station (AP1 plus the connected computer 1) can associate to another Access Point (AP2), and then can have the Internet access if the other Access Point (AP2) has the Internet connection.

You can share files and printers between wireless stations (PC and laptop with wireless network adapter installed).

It is mostly used by enterprise to connect 2 remote offices network together.

The bridge modes are connected by using either the WDS (Wireless Distribution System) or Adhoc topology This feature is also useful when users want to bridge networks between buildings where it is impossible to deploy network cable connections between these buildings.

For WDS repeater to work, the remote wireless APRouter must also support WDS function.

To set the operation mode to WDS Repeater, please go to Mode Repeater, click the Setup.

However, router functions are added between the wireless WAN side and the Ethernet LAN side.

Therefore, the WISP subscriber can share the WISP connection without the need for extra router.

Connect an Ethernet cable between your computer and the Wireless Access Point.

Start your WEB browser.